Race Ways Junction Boxes
Race Ways Junction Boxes
Material finish for Race Ways Junction Boxes | |
Powder Coated | Are used in all building segments as well as industries for internal applications. |
Pre-Galvanized | Are used in all building segments as well as industries for internal applications. |
Hot-Dip Galvanized | Are used in all building segments as well as industries for internal / External applications |
Alluminium | Are used in petro chemical plants, paper mill and marine environment . |
Stainless Steel | Are used in Food Industries and in highly corrosive environment. |
Features
• GI Junction Box suitable for trunking with duct entry of 25mm to 60mm.
• Epoxy coated trap lid to prevent and rust accumulation on the exposed parts
• Smooth curves on all four sides of the pillar to ensure safety of Cat 6 cables, when pulled
• Excellent load bearing capacity of 3.6 tons on the trap lid.
• Adjustable levelling screws on all 4 sides to match any floor finish.
Dimensions
MEM ®-JB100
100mmx100mmx50 – 75mm depth
MEM ®-JB150
150mmx150mmx50 – 75mm depth
MEM ®-JB 250
250mmx250mmx50 – 75mm depth
MEM ®-JB 300
300mmx300mmx50 – 75mm depth
MEM ®-JB 350
350mmx350mmx50 – 75mm depth
MEM ®-JB 400
400mmx400mmx50 – 75mm depth
Race Ways Junction Boxes | |
Light Duty Race Ways Junction Boxes | Light duty Race Ways Junction Boxes with special perforation in the base with moderate ventilation with added cable support advantage. |
Medium Duty Race Ways Junction Boxes | Medium duty Race Ways Junction Boxes with special perforation right angle edge in side rail for reinforcement and edge protection. |
Heavy Duty Race Ways Junction Boxes | Heavy duty Race Ways Junction Boxes with special perforation in the base and rolled edge in side rail for reinforcement and edge protection including cable tray connector sets. |
